This Item has been refurbished by and ships from Brewster Electronics in Brewster NY.
Recreating the sound of the most revered console in the world, the MP73EQ's all-discrete circuitry will fill your studio racks with sonic excellence! The versatility starts at its input stage, with a switch that allows you to select the impedance option that sounds best for your microphone. With up to 80dB of gain, you'll have enough gain for even the lowest output microphones. A switchable high pass filter allows you to "cut the mud" below 50, 80, 160, or 300Hz. High and low-frequency shelving equalizers with selectable frequencies give you an enormous range of tone, along with a semi-parametric mid control that lets you dial in frequencies from 360Hz all the way up to 7.2kHz. If You're looking for a great channel strip that sound wonderful with any microphone and sound source, the MP73EQ is a perfect choice!
Specifications:
* Frequency Response: 11 Hz 77.65 kHz 3 dB.
Level variation is less than 0.2%.
* Input impedance: Microphone 300 & 1,200 ohms
Line 10,000 ohms
D.I. 100,000 ohms
* Sensitivity: Microphone -80dBm to -20 dBm in 5dB steps for 0 dBm output.
Line -20 dBm to +10 dBm in 5 dB steps for 0 dBm output.
* Output: Balanced and floating to feed a 600 ohm load.
Maximum output +26 dBm into 600 ohms, or +20dBm into 150 ohms.
* Output impedance: 600 ohms, balanced (source impedance 75 ohms).
* Distortion: 1k Hz = 0.0245%
* Noise: Measured at 80 db of gain with 200 ohm input termination,
without
20Hz to 20kHz to assist in filtering out noise.
-49dbu with final output stage at 50% EIN -129 dbu;
-46dbu with final output stage at unity EIN -126 dbu;
-56dbu without final output stage EIN -136 dbu.
Controls either “flat” or switched out.
* Output: Balanced and floating to feed a 600 ohm load.
Maximum output +26 dBm into 600 ohms, or +20dBm into 150 ohms.
* Output impedance: 600 ohms, balanced (source impedance 75 ohms).
* Distortion: 1k Hz = 0.0245%